The duty of a certified “heating gas engineer” is to maintain and installation of pipes, fittings, and fixtures for building heating. It is our primary duty to  pick and locate a reliable heating gas engineer. You have to make sure that the concerned craftsman is capable of delivering top quality work with optimal safety. We at Bag a Builder would assist the homeowners in finding a reliable heating gas engineer who has gained relevant experience and skills holding a valid CSCS card.

Types of Heating System

There are five major types of heating system, which are discussed below:

• Forced Air Heating System:-

Forced Air Heating System is one of the popular heating systems used in residential areas, retail outlets and massive buildings. The process involves heating the air within the furnace and it is blown through vents, ducts, and registers. It is sometimes referred to as the standard central heating system as it makes use of fuels based on its availability at a particular spot. This type of heating system is powered by natural gas, fuel oil, propane or electricity. The ductworks are normally placed within the interiors walls of a building.

• Electric Systems:-

It is yet another heating system that is found in households but it does not have instant access to propane, fuel oil and natural gas. One of the best options is to install a baseboard heater that is managed by a thermostat. A major concern concerning electric systems is that monthly electricity bills will be high when compared to other heating systems. It implies that you need to limit its usage during the onset of the winter season.

• Geothermal Systems:-

Geothermal Systems are energy-efficient devices wherein heat is drawn from beneath the surface and water from ground wells. One of the major highlights concerning Geothermal Systems is that it requires minimum power thereby saving a considerable amount of money. Upfront and installation costs will be high when compared to other conventional sources.

• Radiant Heat Systems:-

Radiant Heat Systems are utilized for commercial and residential purposes. The process involves heating water in a boiler that is transferred via tubes. It is then placed beneath the surface to spread heat across the entire floor and rooms in a specific building. Radiant Heat Systems are normally powered by electricity, natural gas, propane, and fuel oil.

• Steam Radiant Heat Systems:-

Steam Radiant Heat Systems is a type of heating system wherein boilers are used to transfer hot water to each radiator and the cold water is drawn back to the boiler unit to be reheated.

Responsibilities of Heating Gas Engineer

Heating Gas Engineer is a person who is responsible for electric boiler installation, servicing and repairing of a client’s gas appliances as well as heating systems. A heating gas engineer carries out activities only following the manufacturer’s instruction and guidance. It is difficult in locating a heating gas engineer who knows their duties and responsibilities.

• • To repair, replace, maintain and install gas appliances by complying with the manufacturer’s instruction and guidance.

• • Possess a full driving license and should be geared up to undertake tasks at different locations

• • They must be competent to undertake all types of standard gas works related to domestic flats and housing

• • They should be able to effectively interact with their clients and clearly describe the mode of operation of gas appliances.

• • They must be able to meet deadlines and cooperate with managers concerning changes in appointments and schedules.

Risk Factor

As you know that maintaining and repairing electric heating systems is not a simple task since it requires years of training and experience. However, a certified heating gas engineer is familiar with the significance of safety at worksites and attempts to reduce the risk.

• Inhaling carbon monoxide:-

The possibilities of getting into contact with hot surfaces and flame and the risk of inhaling carbon monoxide are high. Considering this, a certified heating gas engineer takes precautionary measures to prevent fatalities.

• Gas leakage:-

Since gas pipes are placed below the ground, lack of maintenance might trigger leaks and accumulation of gas and enhances the risk of explosion.

What Bag a Builder does?

It is indeed a great option as it helps you to save a considerable amount of time and money. Bag a Builder would assist you to establish a contact with a heating gas engineer through messenger or email.

Bag a Builder is currently one of the authentic and trusted online platforms. They were able to attain this position only with the support of tradesmen and homeowners.